Bonnet on EON on cylinder.
WY for a couple of rows
TWO weights for Cyl only
AT LEAST THREE weights for ribber.
Bonnet and Buckle placement:
Pinch bonnet so the buckle goes sideways from front to back, in line with where the centre of the heel will go. This makes placement of the centre heel weight so much easier.
Ribber Weighting.
The ribber post interferes with the correct knitting off of all stitches on that side of the machine when the ribber is attached (NOT when using cylinder only), at least three weights is needed on the buckle to force the stitches to be correctly knitted off around the post. And as the buckle is lined up on the edge near the post - make sure it's FIRMLY in place so maximum benefit of the weight if placed, right where it's needed the most.
Experiments:
prefect toe up
8ply EON
"Scotch" heel
** INCOMPLETE** photos for me so I don't forget what worked best and more notes to follow
Thursday, June 2, 2016
Sunday, April 3, 2016
The Modern Victoria Automatic Knitter (aka CSM)
My friend and I went halvies in a Circular Sock Machine. It has been refurbished and it my turn to have at it. and here it is:

Owen has already made us a "bonnet" which is like a cast on rag.
So this afternoon, youtube and I will be exploring the possibilities... I'll come back later and put in some photos of how it went.
Update:
I've had a good much around with it. Tried out a few different experiments. I did try out the toe up version, but. I have to say I kitchener stitch a seam closed faster than I rehang the other side of the toe.
I did pick up one dropped stitch for the practice. it was not moving up the weights. I also did some 4.5 4 and 3.5 stitch sizes on the tube. I also tried putting the needles onto the ribber mechanism. Well that didn't work! so next experiment will be top down.
Photo includes dropped stitches not picked up.


Owen has already made us a "bonnet" which is like a cast on rag.
So this afternoon, youtube and I will be exploring the possibilities... I'll come back later and put in some photos of how it went.
Update:
I've had a good much around with it. Tried out a few different experiments. I did try out the toe up version, but. I have to say I kitchener stitch a seam closed faster than I rehang the other side of the toe.I did pick up one dropped stitch for the practice. it was not moving up the weights. I also did some 4.5 4 and 3.5 stitch sizes on the tube. I also tried putting the needles onto the ribber mechanism. Well that didn't work! so next experiment will be top down.
Photo includes dropped stitches not picked up.

Thursday, November 5, 2015
MKM Oct 15 Article on How I Make Felted Slippers
... has now been published in Machine Knitting Monthly, Oct 2015
Which is very thrilling for me and I'd like to thank my friend Bev for suggesting it and Anne Smith of MKM for publishing.
I hope anyone getting the mag likes the article. Here are my daughter Anthea and her friend April drinking hot chocolate and wearing their slippers.
Working on adding photos and explaining my working notes...
First edit 7 Jan 17.
Anthea’s Bloom Purple + some of April’s pinks
Which is very thrilling for me and I'd like to thank my friend Bev for suggesting it and Anne Smith of MKM for publishing.
I hope anyone getting the mag likes the article. Here are my daughter Anthea and her friend April drinking hot chocolate and wearing their slippers.
Working on adding photos and explaining my working notes...
First edit 7 Jan 17.
Anthea’s Bloom Purple + some of April’s pinks
April’s Murano 47 Pinks and Vine
Kris’ Vine, Hydrangea and Shoal - that she sent.
Kris’ Vine, Hydrangea and Shoal - that she sent.
Anth and Kris about the same size (Oz size 9 = Ladies Large), (Ash - 4 rows less in foot, Oz size 7 = Med) all widths the same.
SK155 T6
SK155 T8 - fair isle upper.
SK155 T6
SK155 T8 - fair isle upper.
Punched the cards - 12st repeats. - from the Chunky pattern book - Kris’ is from book 4 with the lady in blue with the lace tie.
make the inner sole: Ev 4th row EON alternating slip stitch:
C026 WY, 1 row MY working short row from the middle 8/12/8.
K (56) 60 rows
short rows to 12, take it off ready to graft onto outer sole.
C026 WY, 1 row MY working short row from the middle 8/12/8.
K (56) 60 rows
short rows to 12, take it off ready to graft onto outer sole.
CO 61 (1 for join) T8 - cuff 1:1 EON slip st 4th row once
knit 2 rows, pick up loops from slip st EON
T9 - join together 1 row.
Divide up 13,4,26,4,14 (= +1 for join)
take off 26 - for front 4 + 4 onto bobby pins put 13-1=13 24
join inner sole and work short rows out. - joining loops from slip stitches ev 4th row EON.
change to heel colour short row down to 7/12/7 or 6/14/6 depending on how pointy the toes are.
Change to under sole colour
knit (56) 60 rows, picking up both the stitches on bobby pins and the inner sole. (for the first 10 rows).
short rows to 14 (Anth 12), attach the end of the inner sole, continue graduations back out to 26sts,
T8 start fair isle, contrast in Feeder B
join to both sole pieces SAYG to end.
but leave the opposite end needle in hold and knit both threads manually.
Graft (kitchener) to cuff.
secure and weave in ends.
knit 2 rows, pick up loops from slip st EON
T9 - join together 1 row.
Divide up 13,4,26,4,14 (= +1 for join)
take off 26 - for front 4 + 4 onto bobby pins put 13-1=13 24
join inner sole and work short rows out. - joining loops from slip stitches ev 4th row EON.
change to heel colour short row down to 7/12/7 or 6/14/6 depending on how pointy the toes are.
Change to under sole colour
knit (56) 60 rows, picking up both the stitches on bobby pins and the inner sole. (for the first 10 rows).
short rows to 14 (Anth 12), attach the end of the inner sole, continue graduations back out to 26sts,
T8 start fair isle, contrast in Feeder B
join to both sole pieces SAYG to end.
but leave the opposite end needle in hold and knit both threads manually.
Graft (kitchener) to cuff.
secure and weave in ends.
Saturday, May 9, 2015
Chunky/Bulky SK155 Felted Slippers
So, these are how I make mine, each to their own as they say, but when I want to make another pair, my notes are all ready for me to read up and knit.
I'm editing the pattern, it will be back soon.
Friday, May 8, 2015
MissTake aka SK155
What happens when ebay says.. ooohh you liked this KX350? you've looked at it twice, how about looking at this? It was an SK155 bulky machine - with $80 freight to Oz - from California - so I put in the minimum bid. thinking - no way am I going to get this, but, but $80 all the way from California?? really? I couldn't get it sent to the other side of Sydney for 80 bucks. So I put in the bid.
Well the next week I was unpacking the jolly thing in my loungeroom. How did this happen? I do not know. LOTS of people said, Why didn't I tell them I got one so cheaply on ebay?? And I said - where was your bid???? less than $500 oz dollars landed on my loungeroom floor packed in Hanna Montana Christmas paper? Honestly I kid you not, several rolls of it and.. where were all the other bids? huh?
So I have MissTake a beautiful SK155 9mm chunky/bulky metal knitting machine only needed a new sponge no rust, no yuk on the needles, just as Mary Poppins as can be - practically perfect in every way.
I thought she would like her photo in here somewhere so here she is:
and we made a sleeve in Bendigo 10ply Shetland
then the rest of it, which turned out like this:
Well the next week I was unpacking the jolly thing in my loungeroom. How did this happen? I do not know. LOTS of people said, Why didn't I tell them I got one so cheaply on ebay?? And I said - where was your bid???? less than $500 oz dollars landed on my loungeroom floor packed in Hanna Montana Christmas paper? Honestly I kid you not, several rolls of it and.. where were all the other bids? huh?
So I have MissTake a beautiful SK155 9mm chunky/bulky metal knitting machine only needed a new sponge no rust, no yuk on the needles, just as Mary Poppins as can be - practically perfect in every way.
I thought she would like her photo in here somewhere so here she is:
and we made a sleeve in Bendigo 10ply Shetland
then the rest of it, which turned out like this:
Sunday, March 30, 2014
2014 Show Stuff and the RG14 Games
Well now, I know that I should have posted this one a while ago, but better late than never. It's showtime in the first half of the year here on the east coast. Canberra first, then Sydney and all the local suburban shows around Sydney suburbs.
For Canberra I've put in a tuck stitch baby blanket and bubble scarf.
Sydney circuit is a little different for me this year, I've decided to bit the bullet and put in the Sydney Royal. I decided they need a Kate shawl, one of the lace cotton tops from last year, some socks and something from Carl Boyd's lecture from Dream week

I've combined the socks, Kate shawl and Carl's idea-ish in with the Ravellenic Ravelry 2014 KAL while the Olympics are on the tele.
Friday, February 21, 2014
Quick Ribbed Hat
This is the quick and easy hat I make for Theo on the Passap with sock wool. Cast on 70L:71R 11.11.11 BB and fill in the . on the FB with 11.11.11.11 needles, I don't follow the needle rule, for this hat, because it seams better with two stitches on each end of one bed, been doing it for years and no harm has ever come to machine or ribbing..
That gives what I call 140 but of course isn't.
T3.5, 100R (this doesn't have any turn up if you want it to, then do 150Rows. If you want a looser ribbing then increase the stitch size but this is a firm rib.
FB: dec 11 to 1 - T3 rack half a turn so it's in the middle of the 11.11 on the .
knit 4 rows
BB dec 11 to 1 - T2.75 rack back so it's even and have both locks T2.75, but I like to leave both end 11 there so I can seam the last couple of rows easier.
T2.75 knit 2 rows
Take off with waste yarn.
Sew seam.but don't cut the yarn yet.
then I double the yarn ove so I get two threads through the loops of the last stitches, I think they draw in better, then tie them up with the tail from the side seam.
I like to run the needle directly opposite and tie it off then the other side of the + to close it up a little bit better. I think boys like a more complete hat.
For Japanese conversion, which I haven't done, because I use the Passap for all ribbing but this should work:
Set up your ribber to knit 11.11 and use the recommended stitch size, and maybe one click lower if you wanted a firm ribbing. the set up is the same L70/R71 11.11 all the way along
half pitch the ribber and fill in the empty needle on the main bed with two ribber needles.
Cast on normally and knit 100 rows
then decrease on the ribber bed so you have 1 needle and pull pitch so it's even between the main bed needles. knit 4 rows and decrease maybe 1 whole number? you may need to use the doover thingo to prepare the ribber needles to knit correctly.
decrease the main bed so you have 1 needle on each bed in work and half pitch so they are nice and even.
decrease the stitch size maybe 1.1? certainly want to tighten things up and maybe pull all the needles out to hold, to allow them all to knit off correctly at such a low number for both the next two rows. I would to make sure it knit and it doesn't take long with the ruler.
Take off on WY and finish the same.
Subscribe to:
Posts (Atom)








